TYREDOG™ TD-2300A-X10 10 Wheel Heavy Duty Tyre Pressure & Temperature Monitor with Extended Range.

Recommended Use: Heavy Duty Vehicles, Trucks, Buses, Coaches, Mining Trucks / Earth Moving Agricultural Equipment, Motor Home's, Cars towing Trailers / Caravans. (Monitor up to 180 PSI)

The TYREDOG™ TD-2300A-X Series Tyre Pressure and Temperature Monitor can support 4 to 34 tyres, monitors up to 180 PSI and can be installed (D.I.Y)
* Note: Some technical knowledge is required for mounting the relay / repeater module underneath the vehicle or if you decide to hardwire the relay / repeater module to 12/24VDC power source.

The User Friendly Graphic Interface (LCD monitor) allows the user to monitor and understand the status of all their tyres on the one screen thus ensuring they are always well maintained.

The Design
• All sensors can be securely locked onto tyre valves for added safety.
• Learnable sensors are available so in the event of theft or damage, sensors can be quickly and easily replaced.
• Sensors have unique individual codes to ensure there is no interference from other 433MHz devices, even other TYREDOG™ systems.
• All TYREDOG™ kits undergo strict field testing to ensure quality.
• Sensors are treated for anti-corrosion during manufacture and use rubber seals to prevent liquid and fine particles from coming in contact with the circuitry.

How it works
The Wireless Sensors are fitted to the wheels valve stem. Simply replace the valve cap with a Wireless Sensor and fit the supplied SecureFit ring to ensure the sensor is securely fastened. This SecureFit ring can also act as a theft deterrent.
The Relay / repeater system must be mounted underneath the vehicle. This can be powered up by 4 x AA Batteries or you can hard-wire to a 12V/24V Power Source.
Once the Sensors and Relay are fitted and the monitor/receiver is turned on (Powered by 12/24V Cigarette Lighter Adaptor), within a couple of minutes or once the wheels rotate, the latest Pressure and Temperature information will be updated on the monitor/receiver.
The sensors will then transmit any changes in pressure or temperature. If the Pressure falls or raises above the user preset levels, the unit will sound to alert the driver. There is also a visual indication on the Monitor / Receiver unit.
Low, High Pressure and High Temperature threshold settings can be adjusted by the user for each axle.

What's included
1 x Monitor / Receiver
10 x Wireless Sensors (inc 10 x CR1632 Batteries)
10 x SecureFit Rings
1 x Suction Cap Mounting Bracket
1 x Cigarette Lighter Power Adaptor
1 x Relay / Repeater unit (inc 4 x AA Batteries, Power Cable and Mounting Hardware)
Owners Manual

Note: This model can be configured to support many different wheel layouts.
You can also Add-on a TD-RY2300A-X Trailer Kit or two which enables the system to monitor up to 34 Wheels.